Google Search

 

 

 
 
.

Site Index  | Home  About Us  Site Contents  |  Export Product info  |  Experience  |  Manufacturing

Asia Bolts & Nuts (MFG) Sdn. Bhd.
Export Product Information

 
 

 

 


 

 

 

Hot-Forging Machine Capability
Diameter: 27mm to 64mm or 1.1/8 inches to 2.1/2 inches  and Length: Up to 1,000mm or 39 inches

We are able to manufacture standard bolts Hot forging up to the following dimension:  Diameter up to 64 mm or 2.5 inches Length up to 1 meter In accordance with the international standard such as ISO, Din BS, ASTM, JIS, ANSI and special requirements our Manufacturing Process

Our factory manufactures standard and customized products in terms of types of fastener, usage, market available materials, quantity and quality requirement. Our equipment and capacity will be your best choice for bigger diameter products used in projects.

Products Range
Anchor Bolts-Type A B C E F

Hexagon Head Cap Screws, Socket Head Cap Screws, Threaded Rods, Studs, Sag Rods or Tie Rods , Flat Head Socket Cap Screws, Super-Bolts, T-Bolts, U-Anchor, U-Bolts, Couplers, Cast-in Anchorage Material Stainless Steel Grade 316/304
Grade 4.6 / 5.6 / 6.8 / 8.8 / 10.9 / 12.9
Standard BS / Din / JIS / AS or any standard
Various Type of Customized Requirement

Production Capacity Our monthly production capacity is presently up to 200 Metric Tons. Our proposed new plant will be operating by the year of 2001 at our 3 acres Nilai Industrial Park.

 

 

 

 
 

Google Search

 

 

 

The Fastener Specialist - Asia Bolts & Nuts Manufacturer of bolts and nuts, fasteners for export

 
 
Glossary of terminology on topics related to nuts and bolts, threaded fasteners and tightening techniques.

DIRECT TENSION INDICATORS
Direct Tension Indicators (DTI's) is a term sometimes used to describe load indicating washers.

Projections on the face of the washer (usually on the face abuting the bolt head or nut) that deform under loading as the bolt is tensioned.

An indication of the tension in the bolt can be made by measuring the gap between the washer face and the nut or bolt head.

The smaller the gap - the greater the tension in the bolt. Commonly used in civil rather than mechanical engineering applications.

 
 

DESIGN FORM OF THREAD
The design form of an internal or external thread is the thread form in it's maximum metal condition. It is the same as the basic thread profile except that the thread roots are rounded. If either the internal or external thread form exceeds the design form of the thread profile then a potential interference exists.

DYNAMIC FRICTION - Resistance to relative movement of two bodies that are already in motion.