steel bolts Exporter

Terminology on topics related to;
nuts and bolts, threaded fasteners and tightening techniques

SCREW THREAD - A ridge of constant section which is manufactured so that a helix is developed on the internal or external surface of a cylinder.

SET SCREW
A set screw is a threaded fastener that is typically used to hold a sleeve, collar or gear on a shaft to prevent relative motion.

It is a threaded member that normally does not have a head. Unlike most other threaded fasteners it is basically a compression device normally used to generate axial thrust.

Various socket types are provided to allow the set screw to be rotated. These types include hexagon socket, fluted socket, screwdriver slot and square head. Various point designs are available (the part of the set screw that rotates against the shaft being secured) and include:

Cup - Hollowed end, is the most commonly used point style. Used when the digging in of the point is not undesirable.

Cone - Pointed end, this type generates the highest torsional holding power and is typically used for a permanent connection.

Oval - Rounded end that is typically used when frequent adjustment is required. The oval end prevents/reduces indentation.

Flat - Cause little damage to the shaft and are used when frequent adjustment is required.

Dog - Flat end with the threads stopping short of the end with the end fitting into a hole.

SHOULDER SCREWS - A threaded fastener with a plain, precision machined, shank that is used for location purposes. They are typically used for pulleys and linkages.

SHANK - That portion of a bolt between the head and the threaded portion.

Can't find what you need?
Try Google....

Home About Us Site Contents Export Product Info Experience Manufacturing

Production Capacity Our monthly production capacity is presently up to 200 Metric Tons. Our proposed new plant will be operating by the year of 2001 at Nilai Industrial Park with a total area of three acres. Studs & Anchor bolts Stainless Steel, High Tensile steel and Mild Steel Hex. bolts Special bolts and parts made to customer's drawing or samples Plow bolts, Carriage bolts, Square bolts and Rivets as well as many other Product Range

Material Stainless Steel Grade 316/304 Grade 4.6 / 5.6 / 6.8 / 8.8 / 10.9 / 12.9 Standard BS / Din / JIS / AS or any standard Various Type of Customized Requirement

Our factory manufactures standard and customized products in terms of types of fastener, usage, market available materials, quantity and quality requirement. Our equipment and capacity will be your best choice for bigger diameter products used in projects. Products Range: Anchor Bolts-Type Hexagon Head Cap Screws Socket Head Cap Screws
Threaded Rods/Studs Sag Rods or Tie Rods Flat Head Socket Cap Screws Super-Bolts, T-Bolts U-Anchor /U-Bolts Couplers, Cast-in Anchorage